Nordfab Quick-Fit Inline Spark Trap provides simple and economical fire protection. The Quick-Fit Inline Spark Trap, when installed in ducting as part of a dust collection system, greatly reduces the possibility of fire in cyclones and collectors by decreasing the number of sparks which could reach the cyclone or collector through the ductwork.
It is effective because it disrupts the laminar airflow, causing sparks to cool and extinguish before they can enter a cyclone or collector.
The Quick-Fit Inline Spark Trap can be quickly and easily installed into Quick-Fit Ducting systems (or other ductwork systems if you use the correct adapter).
The Spark Trap can be easily removed for cleaning since there are no moving parts. There is also no calibration, technical assistance or power required for the operation of the Quick-Fit® Spark Trap.
Manufactured from Galvanised Steel.
Spark Trap must be mounted in a horizontal position
Duct Distance Recommended- At least ten diameters from Cyclone/Collector
Dimensions for 150mm, not mentioned on the data sheet is 520mm Long
If you require any further information, please get in touch at info@dustspares.co.uk
Nordfab Quick-Fit Ducting removes the need for rivets, screws and welding which significantly reduces the time required to install or replace ducting - reducing costs and downtime. QF is quick and easy to install, is easy to clean and is re-usable after relocating machinery during workshop changes.
