Video - How To: Assemble Backplate Bracket Kit

July 27, 2020 Team Dust Spares Comments

Video Transcript:

"Hi guys, thanks for joining me! In this video I will be showing you how to assemble our Backplate Duct Bracket Kit, used for fixing ductwork from a ceiling. Here I have the components, I have - a suspension clip, M10 threaded rod, M8/M10 backplate and 2 M10 nuts.

The first job, is to wind an M10 nut on each end of the threaded rod about 20mm down. You then, want to take an M8/M10 backplate and secure that on one side of the M10 threaded rod, fastening in place with the M10 nut.

On the other end, you want to add the suspension clip. You can fasten that on and secure it in place with the M10 nut. At this point, you would place your spiral ducting into the suspension clip, securing in place with the bottom half, and securing with a flat screwdriver.

You can now fasten all of the M10 nuts in place using an appropriate tool.

That is how you assemble our Backplate Bracket Kit! Thanks for watching and don't forget to like and share!"