Connecting Nordfab “Quick-Fit” Ducting Pipes: A Simple Guide

April 25, 2024 Team Dust Spares Comments

If you’re working with Nordfab “Quick-Fit” Ducting pipes, you’re in luck! Unlike traditional spiral ducting, Nordfab pipes are designed for easy and efficient assembly. Let’s explore how to connect these pipes together and address some common questions.

1. Connecting Nordfab Pipes

Nordfab pipes feature a clever design with rolled edges on both ends of most pieces. Instead of using screws or rivets, you can simply clip them together. Here’s how it works:

1. Rolled Edges: Take a look at your Nordfab pipe sections. You’ll notice two rolled edges—one on each end.

2. Clip Mechanism: The magic happens with the clip mechanism. Align the rolled edges and slide them into the clip. Clamp it shut, and you’re done! Nordfab pipes connect securely without any fuss.

3. Retaining Pin: For added security, Nordfab includes a retaining pin. Once the clip is closed, insert the pin to prevent accidental disconnection.

2. Adjusting Pipe Lengths

Nordfab pipes typically come in standard lengths of 1 meter or 2 meters. But what if you need a shorter length? No worries! Follow these steps:

1. Cutting Down: Measure the desired length and cut the Nordfab pipe accordingly. However, cutting removes the rolled edge, which is essential for the clip mechanism.

2. Slip Joint Sections: Nordfab offers slip joint sections (each 300 mm long) specifically for this purpose. Insert the slip joint piece into the cut end of your pipe.

3. Rubber O-Rings: To mimic the rolled edge, use rubber O-rings. Push them down onto the cut length of the pipe. Now you have a secure connection point for the clip joint.

4. Clip It: Attach the clip joint over the O-rings, securing the pipe. Don’t forget the retaining pin!

3. Connecting to Existing Systems

What if you want to connect Nordfab pipes to an existing spiral ducting system? Nordfab has you covered:

1. Ventilation Adapter: Use a ventilation adapter. It clips onto your Nordfab pipe and fits seamlessly into the spiral system. Now you can transition from spiral pipe to Nordfab pipe (or vice versa).

4. Adapters for Flexibility

Nordfab offers additional adapters for flexibility:

1. Bends Sets: Need to create bends in your ducting system? Nordfab provides bends sets for smooth transitions.

2. Flexible Duct Adapter: If you want to connect your Nordfab dropper to flexible ducting, use the flex adapter. Clip it onto the dropper, and attach your flexible duct.

Nordfab’s “Quick-Fit” Ducting system is not only efficient but also adaptable. With its rolled edges, secure clips, and thoughtful accessories, it’s a breeze to work with.

Feel free to share this article with anyone interested in Nordfab ducting. If you have more questions or need further assistance, don’t hesitate to ask!

We’ve also published a video version of this article on our YouTube Channel