Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
90 Degree Pressed Bend - All Questions
90 Degree Pressed Bend
Starting at £9.83 £8.19
Product Code
PRESSED-BEND-90
Hello,
What is the difference between a pressed bend and fabricated bend?
What is the difference between a pressed bend and fabricated bend?
Question by: Melanie Dew on Nov 7, 2023, 1:26 PM
Hello,
Pressed bends range from diameters 80mm-200mm. Fabricated bends are 80mm-300mm. (Other larger sizes are available for quoting).
If you have a diameter between 80mm and 200mm then you can choose either or, and then just a visual preference.
Hope this helps! Give us a shout at info@dustspares.co.uk if you have anymore questions.
Thank you,
Stacie
Pressed bends range from diameters 80mm-200mm. Fabricated bends are 80mm-300mm. (Other larger sizes are available for quoting).
If you have a diameter between 80mm and 200mm then you can choose either or, and then just a visual preference.
Hope this helps! Give us a shout at info@dustspares.co.uk if you have anymore questions.
Thank you,
Stacie
Answer by: Stacie Evans (Admin) on Nov 7, 2023, 1:35 PM
Please could you tell me the height of the elbow?
Question by: Nick on Feb 15, 2024, 9:08 AM
Good afternoon,
Thank you for your question.
To work out the C/L radius you'd need the below formula:
C/L radius plus half diameter plus end piece
Eg 100 pressed bend
1 c/l rad = 100mm
1/2 dia = 50mm
End piece = 40mm
Total height = 190mm Approx.
Hope this helps.
Thank you for your question.
To work out the C/L radius you'd need the below formula:
C/L radius plus half diameter plus end piece
Eg 100 pressed bend
1 c/l rad = 100mm
1/2 dia = 50mm
End piece = 40mm
Total height = 190mm Approx.
Hope this helps.
Answer by: Stacie Evans (Admin) on Feb 15, 2024, 2:30 PM